There may come a time when you find that your tires are rubbing a bit when you are turning hard...
So, there I was after the Round #2 build up. I had 35″ MTRs on Lady. I was sitting on...
It started out yesterday when some friends came over to wrench on their Jeeps. One of the guys wanted to go through and torque his control arm and track bar bolts as it had been a while since he last did it. If you’ve driven a TJ off-road very much,...
It was going to be an OK day for a Saturday, with a night run schedule for early evening. A...
I never looked forward to working on the lower control arms of my TJ because putting the arms back in...
Eventually, we will all need to do some work on our brake system that will result in the need to bleed the system. If air becomes trapped in the brake lines, which happens when we disconnect a metal line or rubber brake hose, the brake pedal will feel soft and...
I was in a situation the other day where I was getting ready to do a brake project on the...
Bumpstops…..we use them on our suspension systems to limit the spring travel. This is done for two reasons…..the first is...
Note: The contents of this write-up may no longer reflect the currently offered configuration from Teraflex. Your control arms may or may not be of the design shown in this write-up. As most of you know, the Teraflex control arm bushings wear out easily, and you have to replace them...
After my 2nd lift build-up, I was right at the ragged edge for my front brake hoses. When Lady flexed...