4x4 - Home


TJ Heater Core Replacement #2

by Taka Sokabe

Remove the 2 screws mounting the floor duct to HVAC unit using a 5/16 socket.

tj069

 

Remove the 1 rear screw mounting the floor duct to HVAC unit using a 5/16 socket. You barely see it but can reach from driver's side. After removing all 3 screws you can pull it towards driver's side.

tj071

 

Remove the screw holding the HVAC unit to the firewall bracket, near the fuse panel, using a 5/16 socket or wrench (a holding ring for air duct was attached on the top of the bracket).

tj072

 

Remove the upper air duct in the passenger's side from HVAC unit. No screws or tubs.

tj073 

 

This is the upper air duct.

tj075 

 

More Heater Core Replacement

 

 

4x4 Off-Road    Homestead    Firearms    RC Flying