4x4 - Home

TJ Heater Core Replacement #2

by Taka Sokabe

Detach the harness clip from the holder on the upper side of steering column.



Remove the pinch bolt securing the steering shafts using a 13mm socket. This pic was taken from the bottom side. Set the steering straight so that you can reach to this bolt easily through notch.


The securing bolt was removed.



Remove the left side nut securing the steering column to the cross-member of the firewall using a 13mm socket.


The nut was removed.



More Heater Core Replacement



4x4 Off-Road    Homestead    Firearms    RC Flying